• Q1: What should we pay attention to install a LPR camera?2020-11-16

    1. License plate must be readable and well lit

    2. License plate dimensions must be at least :

      * 150 pix for rectangular plates and 100 pix for two row plates (for Russia, Kazakhstan,Armenia, Uzbekistan, Serbia).

      * 130 px for rectangular plates and 70 pix for two row plates (for all other supported countries).

    3. Allowed tilt ­ 5 degrees (clock­ and counterclockwise).


    4. Vertical angle and Horizontal angle: should not exceed 30 degrees:


    5. Example of good license plate at day and night



  • Q2: What's the view range is supported by the panorama camera?2020-11-16

    1. Resolution 8K@30fps
    2. H.265 Smart Encode
    3. lField of View Horizontal 360° + Vertical 360°
    4. Edge Panoramic Splicing Image Output
    5. Minimum Object Focus Length 1m
    6. Support View Mode 180°,360°,Fisheye,Planet,Auto Tour
    7. POE Power Supply
    8. IP66, -40~60

  • Q3: How to configure the T5 (thermal camera) for the first time?2020-11-16
    1. Face detection: Detect face of human
    2. Upbody detection:Detect face and shoulder part of human
    3. Fullbody detection:Detect the human shape
    4. Display trace:Display the information of tracing
    5. Confidence coefficient:Face detection sensitivity, the value range is high, medium, low, the larger the value is, the higher the sensitivity. The higher the sensitivity value is, the higher the  detection rate will be, but the more false detection may occur, such as the false detection of the patterns on pedestrian clothes to adult faces.
    6. Smallest pixel:When the pixel of the face in the image is less than the set value (the minimum pixel forface recognition), it is not captured.
    7. Snapshot mode: There are two types timing and optimal.
    8. Upload image interval: 1~10 sec.
    9. Yaw degree:Set face Angle to filter out
    10. FTP upload image matting: Enable or disable
    11. FTP upload whoel image: Enable or disable

    1. Temperature Unit: Celsius and Fahrenheit temperature units are available.
    2. Ambient Type :The ambient of camera.Outside and Inside are available. Inside suggest to be selected when the ambient temperature change frequently.
    3. Ambient Temperature : The ambient temperature of camera. It is set when ambient is outside.
    4. Cavity Temperature : The cavity temperature of camera.
    5. Correction Coefficient: Correction coefficient refers to the deviation of measured object temperature and actual temperature.
    6. Area Temperature Display Mode : The display position of temperature information on the live-video image.
    7. Mount distance:  The actual distance between the detection person and the device, it is set to facilitate the temperature measurement accuracy.
    8. Alarm Threshold : The human body temperature detected exceeds the set threshold temperature alarm.
    9. Alarm Interval(1-1800S) : N/A
    10. Measure Mode: Choose the measure mode from general to preset.
    11. Display alarm area :  Enable or disable the display alarm area

  • Q4: How to configure the face capture camera for the first time?2020-10-30
  • Face Detection: On

    Confidence Coefficient:Mid

    Smallest Pixcel:80

    Image Matting Quality:Mid

    Snapshot Mode:Timing

    Upload image interval: 5s

    Yaw Degree: 60

    Titt Degree: 60

    setting detection area

  • Q5: How to register face capture camera to sunview?2020-10-30
  • Run Sunview software

    1. open "Devices" module
    2. click "Auto Search" to find the IP Cameras
    3. select it
    4. click "Add" to add it to the device list

1 ... 12 13 14

A total of 14pages

Get in on the latest news & products information.
Sign up to be the first to receive the Latest news & products information. You can unsubscribe with one click at any time, but we think you won’t want to.

click here to leave a message

Leave a Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.