Shenzhen Sunell Technology Co., Ltd.
Shenzhen Sunell Technology Co., Ltd.

How to configure the T5 (thermal camera) for the first time?

1. Face detection: Detect the face of human

2. Up body detection: Detect face and shoulder part of human

3. Fullbody detection: Detect the human shape

4. Display trace: Display the information of tracing

5. Confidence coefficient: Face detection sensitivity, the value range is high, medium, or low, the larger the value is, the higher the sensitivity. The higher the sensitivity value is, the higher the detection rate will be, but the more false detection may occur, such as the false detection of the patterns on pedestrian clothes to adult faces.

6. Smallest pixel: When the pixel of the face in the image is less than the set value (the minimum pixel for face recognition), it is not captured.

7. Snapshot mode: There are two types timing and optimal.

8. Upload image interval: 1~10 sec.

9. Yaw degree: Set face Angle to filter out

10. FTP upload image matting: Enable or disable

11. FTP upload whole image: Enable or disable

03/17
2023
Thermal Cameras for Fire Prevention
Introducing the mini bi-spectrum radiometric detector, a powerful thermal imaging camera that is perfect for a wide range of applications. With a temperature accuracy of ±2 °C or ±2%, this camera i...
03/15
2023
Advantages and Applications of 360° Panoramic Fisheye Camera
360° panoramic fisheye cameras are a special type of high-definition camera that uses a fisheye lens to project the entire monitoring area onto a circular image, achieving full coverage and elim...
03/14
2023
Meet Sunell latest 640*512 thermal imaging Bullet network camera
Focus on TargetsEmbedded with deep learning algorithms, upgraded thermal bullet camera can accurately identify humans and vehicles. The focus on critical targets greatly increases alarm accuracy.Perim...