How to deal with the interference when the coaxial HD camera is connected to DVR?

HD signal belongs to high definition signal, which is more susceptible to interference than common CUBS signal

1. Confirm whether the power line and BNC line are in parallel, so that the AC (220V and above) will affect HD signal, and separate the pipe

2. Bypass the interference source;

3. add jammer, reduce interference

4. It is recommended to transmit the signal through optical fiber

PREV: Can coaxial cameras be transmitted by twisted pair?

NEXT: What is the use of the joystick on AHD camera?

Related Surveillance Camera

Press about Sunell

03/17

2023

Thermal Cameras for Fire Prevention

Introducing the mini bi-spectrum radiometric detector, a powerful thermal imaging camera that is perfect for a wide range of applications. With a temperature accuracy of ±2 °C or ±2%, this camera i...

03/15

2023

Advantages and Applications of 360° Panoramic Fisheye Camera

360° panoramic fisheye cameras are a special type of high-definition camera that uses a fisheye lens to project the entire monitoring area onto a circular image, achieving full coverage and elim...

03/14

2023

Meet Sunell latest 640*512 thermal imaging Bullet network camera

Focus on TargetsEmbedded with deep learning algorithms, upgraded thermal bullet camera can accurately identify humans and vehicles. The focus on critical targets greatly increases alarm accuracy.Perim...

Related Network Products News

How to reset the IP Cameras? How to split preview in IMS3 How can I assign a static IP address to my network camera? IP camera will restart every few minutes or sometimes hang?