Ports

8 × Gigabit PoE ports (Data/Power)

2 × Gigabit SFP fiber optical ports (Data)

Ethernet Characteristics

Ports 1-8 support auto-detection of 10/100/1000Base-T(X) and full/half-duplex MDI/MDI-X adaptive features

Transmission

10 BASE-T: Cat3,4,5 UTP (≤ 100 meter)

100 BASE-TX: Cat5 or later UTP (≤ 100 meter)

1000 BASE-T: Cat5e or later UTP (≤ 100 meter)

Optical Port Function

Gigabit SFP fiber optical port, default no include optical modules (optional order single-mode / multi-mode, single fiber / dual fiber optical module. LC)

Optical Cable/Distance

Multi-mode: 850nm / 0 to 500m

Single-mode:1310nm / 0 to 40 km, 1550nm / 0 to 120km

Communication Standard

IEEE 802.3 10 BASE-T, IEEE 802.3i 10 BASE-T,

IEEE 802.3u 100 BASE-TX,

IEEE 802.3ab 1000 BASE-T,

IEEE 802.3z 1000 BASE-X,

IEEE 802.3x

Forwarding Mode

Store forwarding (Full wire speed)

Switching Capacity

20Gbps

Packet Forwarding Rate@64byte

14.88Mbps

MAC Table Size

8K

Packet Buffer Memory

2Mbit

Jumbo Frame

9.2Kb

One-Click Restore Switch

Press and hold for 6 seconds, then release to restore to factory default settings;

Press twice quickly (with a 1-second interval) to switch to non-administrative mode.

LED Indicating Lamp

Power indicator: PWR (green), System indicator: SYS (green), Network indicator: Link (yellow), Optical port: L/A (green)

PoE Standard

Ports 1-8 support IEEE 802.3af/at standard PoE power supply

PoE Pin Assignment

Default: 1/2(+), 3/6(-), 4 core power supply

Maximum Power Per Port

30W

Total Power/Input Voltage

120W

Power Supply

Built-in power: 100–240 VAC, 50/60 Hz, 2.0 A

Power Consumption

Idle: < 5W, Full load: < 120W

Operating Temperature/Humidity

-20°C to +55°C (-4°F to +131°F), 5% ~ 90% (RH)

Storage Temperature/Humidity

-40°C to +80°C (-40°F to +176°F), 5% ~ 95% (RH)

Product Dimensions

271 mm × 181 mm × 44.5 mm (10.67" × 7.13" × 1.75") (W × L × H)

Net Weight

1.7 kg (3.75 lb)

Gross Weight

2.2 kg (4.85 lb)

Protection Level

4KV 8/20us, IP30

Safety Certification

CE mark, commercial, CE/LVD EN62368-1, FCC Part 15 Class B, RoHS.

Port Management

Supports port status display

Provides port traffic statistics

Enables port duplex/negotiation rate configuration

Supports IEEE802.3x flow control configuration (full duplex)

Enables EEE energy-saving and Green Ethernet functionality

VLAN

Supports port-based IEEE802.1Q VLAN configuration (4,000 entries)

Multicast

Supports IGMP Snooping v1/v2, with a maximum of 256 multicast groups

Port Aggregation

Supports static aggregation

Port Mirroring

Supports basic port traffic mirroring

QoS

Diff-Serve QoS

Each port supports 8 output queues

Supports 802.1p/DSCP priority mapping

Supports priority marking (Mark/Remark)

ACL

L2 to L4 packet filtering, matching first 80 bytes message. Provide ACL based on MAC, Destination MAC address, IP Source, Destination IP, IP Protocol Type, TCP/UDP Port, TCP/UDP Port Range, VLAN, etc.

ACL based on port and VLAN

Security

Supports broadcast storm suppression

Supports port rate limiting

Supports port isolation

DHCP

DHCP Snooping

Management and Maintenance

Supports WEB-based management (HTTPS supported).

One-click restore and cable status check functionalities are available