8 Ports Gigabit Managed Ethernet PoE Switch

Ports

8 × 10/100/1000 Base-T RJ45 ports (Data/Power)

8 × 100/1000 Base-X SFP fiber optical ports (Data)

1 × Console RS232 port (115200, N, 8, 1)

Ethernet Characteristics

Ports 1-8 support auto-detection of 10/100/1000Base-T(X) and full/half-duplex MDI/MDI-X adaptive features

Transmission

10BASE-T: Cat3,4,5 UTP (≤ 100 meter)

100BASE-TX: Cat5 or later UTP (≤ 100 meter)

1000BASE-T: Cat5e or later UTP (≤ 100 meter)

Optical Port Function

Gigabit SFP fiber optical port, default no include optical modules (optional order single-mode / multi-mode, single fiber / dual fiber optical module. LC)

Optical Cable/Distance

Multi-mode: 850nm / 0 to 500m

Single-mode:1310nm / 0 to 40 km, 1550nm / 0 to 120km

Parameters

Communication Standard

IEEE 802.3 10BASE-T, IEEE 802.3i 10Base-T,

IEEE 802.3u 100Base-TX,

IEEE 802.3ab 1000Base-T,

IEEE 802.3z 1000Base-X,

IEEE 802.3x, IEEE 802.1q, IEEE 802.3ad, IEEE 802.3q/p, IEEE 802.1w, IEEE 802.1d, IEEE 802.1s

Layer OSI

Layer 2+

Forwarding Mode

Store forwarding (Full wire speed)

Switching Capacity

128Gbps

Packet Forwarding Rate

14.88Mbps

MAC Table Size

8K

Packet Buffer Memory

4.1M

CPU

500Mhz

RAM

1G

Flash

128M

Jumbo Frame

10K

LED Indicating Lamp

Power indicator: PWR (green), System indicator: SYS (green), Network indicator: Link (yellow), Optical port: L/A (green), POE indicator: PoE (green)

PoE Power Supply

PoE Standard

Ports 1-8 support IEEE 802.3af/at standard PoE power supply

PoE Pin Assignment

Default: 1/2(+), 3/6(-), 4 core power supply 

Maximum Power Per Port

30W

Total Power/Input Voltage

120W – 150W

General

Power Supply

Built-in power: 100–240 VAC, 50/60 Hz, 2.3 A

Power Consumption

Idle: < 8W, Full load: < 120W

Operating Temperature/Humidity

–20°C to +55°C (-4°F to +131°F), 5%–90% (RH)

Storage Temperature/Humidity

–40°C to +75°C (-40°F to +167°F), 5%–95% (RH)

Product Dimensions 

(W × L × H)

270 mm × 181 mm × 44.5 mm (10.63" × 7.13" × 1.75")

Net Weight

1.2kg (2.65lb)

Gross Weight

1.7kg (3.75lb)

Protection Level

4KV 8/20us, IP30

Safety Certification

CE mark, commercial, CE/LVD EN60950,

FCC Part 15 Class B, RoHS.

Software Function

Layer 3 Functionality

Support L2+ network management function,

Support IPV4 static routing/default routing, maximum 128 entries,

Support ARP protocol, maximum 1024 entries.

Spanning Tree Protocol

STP(Spanning Tree Protocol)

RSTP/MSTP( Rapid Spanning Tree Protocol)

EPPS ring network protocol

EAPS ring network protocol

802.1x argumentation agreement)

VLAN

Supports port-based VLAN (4K), IEEE 802.1q

Supports protocol-based VLAN

Supports configuration of Access, Trunk, and Hybrid port types.

Multicast

Supports IGMP Snooping v1/v2/v3, with a maximum of 1024 multicast groups

Supports fast leave mechanism for users

Supports MLD Snooping v1/v2

Supports multicast VLAN

Port Aggregation

LACP, Static aggregation, support aggregation groups and max 8 ports per group

Port Mirroring

Support bidirectional traffic mirroring on basic ports

Port Flow Control

Half duplex based back pressure control, Full duplex based on PAUSE frames

QoS

Diff-Serve QoS

Each port supports 8 output queues

Supports 802.1p/DSCP priority mapping

Support queue scheduling mechanisms (SP, WRR, SP+WRR)

Support for priority marking and remarking

Support for flow-based packet filtering

Support for flow-based redirection

Support flow-based rate limiting

ACL

L2 to L4 packet filtering, matching first 80 bytes message. Provide ACL based on MAC, Destination MAC address, IP Source, Destination IP, IP Protocol Type, TCP/UDP Port, TCP/UDP Port Range, VLAN, etc.

ACL based on port and VLAN

Security

User classification management and password protection are supported.

IEEE 802.1X authentication based on ports is supported.

AAA & RADIUS authentication is supported.

MAC address learning limit and MAC address blackhole are supported.

SSH 2.0 is supported to provide a secure encrypted channel for user login.

SSL is supported to ensure data transmission security.

Port isolation is supported.

ARP packet rate limiting function is supported.

IP source address protection is supported.

ARP intrusion detection function is supported.

DoS attack prevention is supported.

Port broadcast packet suppression is supported.

Host data backup mechanism is supported.

Four-element binding function of IP + MAC + VLAN + Port is supported.

DHCP

DHCP Server, DHCP Client, DHCP Relay, DHCP Snooping

Loop Guard

Loop protection function, real-time detection, rapid alarm, accurate positioning,

intelligent blocking, automatic recovery

Management and Maintenance

Console/ AUX Modem/ Telnet/ SSH2.0 CLI

WEB management (HTTPS)

PoE power management

Loop Guard

Download & Management on FTP, TFTP, Xmodem, SFTP

SNMP V1/V2C/V3

One-key recovery

NTP

System work log

Ping Test

Cable Diagnose

CPU instant utilization status view

Li Layer Discovery Protocol, LLDP